2.1.5 System planning worksheet.
General
Processor: Type: 386 486 Pentium PPro
Speed (optional):
Mfg:
Intel AMD Cyrix
Motherboard: Make: Chip Set:
Example: Make: unknown Chip Set: triton II
Mouse: Mfg: Type: bus PS/2 serial port
If serial: COM1 (ttyS0) COM2 (ttyS1)
Hard disk drive(s): Type: IDE/MFM/RLL/ESDI SCSI
Size (list each drive):
If SCSI Controller: Make: Model:
Example: Make: BusLogic Model: 948
Boot: Linux DOS/Windows OS/2 Other
Disk: Partition: Size: Boot:
Disk: Partition: Size: Boot:
Disk: Partition: Size: Boot:
Disk: Partition: Size: Boot:
CD-ROM: IDE/ATAPI SCSI Proprietary
Mfg: Model:
(Proprietary only):
X-Windows:
Video Card: Mfg: Model:
RAM: 1Mb 2Mb 4Mb 8Mb 16Mb
Monitor: Mfg: Model: Max scan rate:
Networking:
Modem: Mfg: Model:
Serial port: COM1 COM2 COM3 COM4
(ttyS0) (ttyS1) (ttyS2) (ttyS3)
Computer hostname: Example: rainier
The following answers are only needed if using network interface card (NIC): (do not configure networking if you do not have a NIC installed)
NIC Type: ethernet token ring FDDI other
NIC Mfg: Model:
Network domain name: (Example: mountains.net)
IP Address: (Ex: 192.168.1.2)
Network address: (Ex: 192.168.1.0)
Netmask: (Ex: 255.255.255.0)
Broadcast address: (Ex: 192.168.1.255)
Gateway(s): (Ex: none or 192.168.1.1)
DNS(s): (Ex: 192.168.1.2)